If you have faced or currently face the problem with common things like pellet feed jamming or wear and tear of your smoker, then replacing the exact component will solve your problem. Thus, without changing your whole smoker you can continue with some $40 – $50 changes. It might seem complicated for you if you face a problem with your digital control system. Adding the element of professional knowledge will help tremendously. Solving problem with $150 is much better than spending $500, right?
One comment I see a lot in various forums like PelletHeads.com is that you want as much efficiency as you can get. As with lump charcoal, this means burning as clean of a cook as you can with as little ash as possible. Different pellet mixes will produce differences in what you get in this area, and the cooker you’re using will dictate this to some degree as well.
Besides being able to smoke, roast, sear and bake your food, the Pit Boss 71700FB allows you to do one more thing – directly grill your meat. The unit comes with a flame broiler, a simple slide-plate, which gives you complete control of grilling on direct flame. This is one of the few models that will let you both smoke and grill, and it comes at a great low price. 

What sets Z Grills apart significantly from the rest of competitive grills is a completely different construction that is more resembling of something like gas grills, which means a door in the front that one can keep grilling accessories behind. Usually most of manufacturers leave the front of the grill open and don’t make use of the space underneath the grill which gives Z Grills huge thumbs up for using this space in a nice and creative way.
The small burn pot is covered with a large deflector plate that absorbs the heat and spreads it out below the cooking surface making them essentially wood-fired convection ovens. Flare-ups are a thing of the past. You need to keep the plate clean because it is right below the food and if you leave sauce and grease on there, it can smolder and leave soot on your food. Carbon buildup will also diminish its heat transmission. 

Turn it on to "Smoke" mode and use the P settings, or cook mode by selecting a temperature. When you select smoke or a temp setting you start the ignition sequence. The fan, igniter and auger motor turn on. The fan stays on until the smoker is turned off. The auger motor continuously delivers pellets to the red hot igniter rod in the firebox for two minutes under normal conditions. Then the igniter rod shuts off and the pellet fire burns with only the assistance of the auger and the fan.

I had hung my hat on the Yoder and had even contacted the factory and a couple of distributors in the DFW area. Then I did my usual, search craigslist and see if anyone is moving and selling their unit. Low and behold a Memphis Pro!!! Story was brand new, bought for a built in and now cannot use it now. Brand new but you may not have a warranty though. Price… wait for it! $1600!!! You got to be kidding! Scam?? Ok well I will contact him. Surprisingly he had it advertised for a few weeks and only had a few contacts but none serious. Ok, I will come look and if you can plug it in and show me the controller works I will take it. Called the factory and they were quite responsive. They said we probably won’t warranty the controller because we don’t know the history but it will depend on the failure. Everything else we will cover. So right before Thanksgiving headed to Dallas and it basically all looked brand new, plugged in and it did everything you could do without burning pellets.
We have already mentioned this product in our review once and we’re talking about it again. Whenever you are thinking of Green Mountain Grills, Daniel Boone should always be your first choice; it’s simply the best among the GMG products we reviewed. Due to having other products at much lower prices with the same features, we could not include Daniel Boone in this review. We have, however, included the Davy Crockett in our review as our Budget Pick.
Another avenue that many pellet grill owners use is participating in a bulk buy of their favorite brand.  Many times by ordering as little as a thousand pounds of pellets and having them shipped via pallet can save enough per pound to be worth the effort.  Also, check the websites of the pellet brands listed above, many have local distributors that maybe with an hour drive of your location.  If you are new to the pellet world, the thought of ordering a thousand pounds of pellets may sound excessive or intimidating.  Many felt this way at first, but if you are in a location where it is hard to get pellets, the mantra of keeping at least a hundred pounds of pellets (five 20 pound bags) on hand at all times starts to make sense quickly.
It’s built pretty solidly, which is what you want with a portable system as it’s obviously being moved around a lot more. I’d say it’s similar in build quality to the Traeger Junior Elite, which as a top of the line smoker says all that needs to be said. If something does go wrong, there’s a two year warranty. I’d have liked more, but it’s there, and that’s good enough.
Z GRILLS or Z Grills is a maker of smokers, grillers, and stainless steel prep work tables galore. It entered the world of pellet grills recently and launched an IndieGoGo campaign in order to fund its “affordable wood pellet grill” for $500,000 and currently gives even Traeger’s economical offerings a run for their money with its ability to accept all types of pellets and do all sorts of cooking styles.
A pellet hopper is what you put your pellets in. The grill will automatically help itself from the hopper and use it to maintain the temperature you want it to. More heat requirement will use more pellet, and less heat will use less. What you need to make sure is that you have a good sized pellet hopper so that your grill can keep using from it and you do not have to keep refilling the hopper too often. There are pellet grills out there that are powerful and gentle enough to be cooking for hours, and sometimes overnight, all thanks to its large pellet hoppers that keep replenishing and refueling the fire all throughout.
I’ve been grilling and smoking for many years and throughout all those years I have burned through many expensive grills. Four years before I purchased the 640 I got on the pellet smoker wagon and started my research. Finally when my daughter was getting married she ask me to cook for the wedding and gave me the perfect excuse to finally get a smoker I wanted. So getting back to the research and after 3 months of comparing I settled on the YS640. I wanted a grill, at my age, to be able to pass down to one of my kids. It was big investment but like I’ve learned in life, you get what you pay for “most” of the time. I have had this grill now, September 2018, will be 4years now. I have no regrets and would do it again. I’ve had some minor corrosion issues and after an email was promptly sent the matching paint to clean it up. I spent the time to do it right and today, a month later, today my grill looks brand new. Honestly nothing like this can be left to take care of itself. Maintenance like anything else is required. But I know this will most likely be my last grill. Thank for a great product and great follow up service. Smoke Shack.....
Is it customer support? I ordered a grill cover(made by a outside vendor in Kansas as well) for my YS640. It ended up with a small leak. I called Don, and by the end of the week I had a brand new one. Also, I was getting ready for my first cook on my brand new YS640, and I invited the whole family over for baby back ribs. I called Joe, and he talked with me on the phone for 20 minutes explaining how the grill worked, what temp to set the pit at, when to rotate the ribs and even which ribs will need to be rotated. Joe was spot on! Best ribs I have ever had!!!
×