The Camp Chef Italia Pizza has all the tools you will need to make you feel like a professional pizza chef. The artisan pizza kit ...includes two pizza peels to move your pizza from the counter to the oven and vice versus. Your pizza will slide right into the pizza oven or stone with ease just like a true artisan. Made of eco-friendly, renewable bamboo. Do not wash in the dishwasher. Dimensions: 11.75 Inch x 19.25 Inch x 0.35 Inch. Weight: 1.3 lbs. read more
PID: For the most precise temperature control, some pitmasters feel that a grill with a proportional-integrative-derivative (PID) controller is the way to go. A PID controller uses algorithms to keep the temperature within a couple of degrees of the setting. It doesn’t use fixed cycles to release the pellets. Instead, the controller only adds pellets when it’s necessary to maintain the desired temperature.

The initial design by Mr. Traeger consisted of a “classic” drum barrel shaped grill design with a chimney on top. Instead of the firebox, the grill contained a pellet hopper. It used a fan to distribute the heat evenly over the pellets. Unlike the modern pellet grills, the original design didn’t include any auto-ignition features and the pellets had to be lit manually.
The small burn pot is covered with a large deflector plate that absorbs the heat and spreads it out below the cooking surface making them essentially wood-fired convection ovens. Flare-ups are a thing of the past. You need to keep the plate clean because it is right below the food and if you leave sauce and grease on there, it can smolder and leave soot on your food. Carbon buildup will also diminish its heat transmission.
Remember, you are paying for every little feature, attachments and details on any product. So do not end up paying you inheritance for a feature that you are probably never going to use. Instead, invest on a pellet grill that caters to your needs and has features that will actually enhance your experience when using it. So do not, I repeat: do not, fall for fancy marketing features that sound too drastic.
I have used this cooker at least once a week for two years. I recently had a couple of issues with it going out and was thinking it was having a serious issue. Quite frankly as much as I use it it should be worn out by now. Here is what I discovered. Carbon had built up on the tempeture probe and the grill wasn't getting accurate readings. Suspecting the temp probe I checked it with an external one and it was off 50 degrees or more. I am assuming that the readings were off enough that the grill controller just shut it off kind of a fail safe? 30 seconds with steel wool and we are back in business.
I have used Bradley, Masterpiece, Green Egg, New Braunfels, Oklahoma Joe, Weber and now Traeger. So there is some experience in these comments. The “set it and forget” it is a misnomer and should not be used with Traeger (or any smoker/grill.) With Pellet Drive before you buy Read up on Er codes. The worst is when the fire pot fills up with pellets because the fire can’t keep up with the auger push and the whole cook is ruined or delayed. You have to pull everything out and basically start over while your expensive prime brisket is trying to be saved in the oven. Doesn’t matter what the weather is or wind conditions. Doesn’t matter if you stare at it and stir the hopper continuously. It will happen. Customer support at first was well you are at fault (didn’t leave the lid open on fireup for exactly 2 to 4 minutes or didn’t vacuum out the firepot between every cook) which is crazy. Finally, after so many calls over the past 6 months they are trying to make it right. Problem is, DO NOT believe the “set it and forget it.” That does not exist with any good cook. I have replaced the controller the fan and now getting a new probe. Do not waste your money. Unless someone out here in BBQ land can give me a recommendation on a product that won’t do this stay away from Pellet Drive?

Does anyone know how to set up a pellet grill? Since pellet grills are a bit less common than a regular conventional gas grill, we had to conduct a bit of research and realized that pellet grills are as easy to set up, they just have more components. The components of the grill include a lid, which is designed to cover the contents of the grill as well as keep the heat in. Other than that, the ‘hopper’ is known as the area of the grill where an individual places the wood pellets and the grill drips the pellets onto the fire to keep the heat going.

×