Regarding getting a good draft, this is a common misconception for pellet grills. The burn pot on pellet grills receives oxygen via a fan unit. As such, there’s no need for a draft to get a measured burn in the traditional sense. Most pellet grills lack sufficient insulation / gaskets, etc to prevent smoke from leaking out of the body. So, unless you’re going with the Memphis or something that uses oven style insulation, you don’t really need a chimney at all IMHO.
Decided that moving these beasts was a little challenging so I bought a Backwoods Party 10 years ago and loved it. But basically have about worn it out. And as I got older I don’t enjoy getting up at 2 AM and then having to get up every couple of hours, after the 45 minutes of getting it ready at 2 AM, to check it and feed it. I also bought a smaller lightly used Open Range, The Good One. Used their recommended method the first time I cooked with it and hated the Q off of it so bad most of it was wasted, wife hated it too and the son ate most of it. It was extremely ash/strong smoke flavored!
Grilla Grills are not only great with their puns, but also great with their products. Since we compiled a list of top 10, getting rid of this product from our review was a very difficult choice. Silverbac Pellet Grill, along with several others from our honorable mentions list, has been tied with our advanced pick. Therefore, we were forced to place this on our honorable mentions list. With its traditional barrel-shaped design and astounding colors, they’d look nice in your backyard should they be your top choice.
This pellet grill has a 440 square inch cooking surface and weighs 73 pounds. It measures 36 by 18 by 39 inches in dimensions and is made out of durable steel and heavy duty 16 gauge steel construction. It has a dial-in control with an LED read-out. Its temperature reaches from 180 degrees to 500 degrees Fahrenheit. It also comes with a meat probe. This Pit Boss is a worthy name to be in our pellet grill review’ list.
Due to having such features and being the best Lousiana Grills Product, the Louisiana Grills LG Pellet Grill 1100 could not escape our vigilant gaze when we did our research. However, it had some shortcomings, mainly due to its build and price that did not allow it to make it into our pellet smoker review. Regardless, we could compare it with some of our products that it had tied with. But as always, we could only choose the top 10 products for this review and this had to go. Regardless, this still is a great product, worth mentioning.
Pellets are made from different woods, each of which imparts a distinctive flavor to the meat. Hickory, oak, maple, alder, apple, cherry, hazelnut, peach, and mesquite are among the flavors available. For more about pellets, read my article, The Science of Wood. There is a pretty good forum for people who have pellet cookers at PelletSmoking.com and of course our Pitmaster Club has a lively discussion on them with many active users.
With the Camp Chef PG24S, you won’t have to constantly refill your hopper. Your pellets will be used as efficiently as possible, as this product comes with a hopper that can hold up to 18 pounds of wood pellets. With the digital heat control system, it instantly feeds the pellets into the grill to maintain the ideal cooking temperature. This ensures that food is cooked most satisfyingly.
Purchased the YS640 about a month ago. So far I have cooked nine pork butts, three racks pork back ribs, one beef brisket and four thick cut New York steaks on it. I am very pleased with the results of these cooks. I have an upright propane smoker, Weber kettle, propane grill and so far the YS640 has out performed all three of those in ease of use and flavor performance. I can get almost the same flavors with my others, but takes more work and babysitting. Also want to mention that the YS640 is built to last. I noticed the ruggedness and excellent USA craftsmanship immediately upon arrival. Some reviewers think maybe the YS has a steep price, but I think its justified due to its construction and craftsmanship. It would be difficult to make something of this caliber for any less. A couple minor things to note is you will have to play with the damper a bit to learn the heat distribution, but after learning it, its not a problem. Doesn't put quite as strong as a wood flavor on the food as my upright propane smoker, but it puts the right amount and I have no complaint here. I would and have already recommended the YS640 to friends and acquaintances. If you have spent long hours smoking foods and know the correct flavors that they should be, your not going to be disappointed with this cooker!
For anyone thats thinking about getting this grill and this hung up on the price, you just need to take the plunge. And when you take it home you will realize it's worth every penny. And then after your first use, you will feel that you under payed. My first smoker grill was a green Mountain and there is just NO comparison on the market to the YS640. Grill grates and other add on's are amazing as well. LOOK NO FURTHER IF YOU WANT A GREAT GRILL/SMOKER/OVEN... ECT
Hey Ben – thank you for your comment. From a retail user standpoint, I think you’d be happy with either a Yoder or FEC. I really like the PG 500 for the purpose that you’re looking at. Best of both worlds it seems the more I’m looking at it. You can see how they approach grilling steaks in this video. You can incorporate the use of GrillGrates in either pellet grill. Both companies make their units in the USA. Both have great reputations. I’m just partial to Cookshack’s pellet smokers over Yoder as I know more folks who use them.
Many people misunderstand a pellet grill of consuming a large amount of power for its working. But it is not even remotely true. While it is true that a pellet grill will use up a good amount for power initially, but it only uses that to come to temperature and form. Once it is ready and in form, it power consumption drops so dramatically that some pellet grills use almost as little power as a light bulb; an ideal choice for keeping power costs to a minimum.
The Fast Eddy's by Cookshack PG500 Pellet Smoker is a collaborative design from respected smoker manufacturer Cookshack and competition-barbecue-circuit pro "Fast Eddy" Maurin. The FEC (Fast Eddy's by Cookshack) line has been popular with competitive teams for years. While most FEC models have a utilitarian appearance, the beautifully crafted stainless steel PG500 fits right in with your shiny outdoor kitchen.
I have always been a believer: “do what you love and you’ll never work a day in your life”. I’ve been lucky enough to use my professional experience in the meat industry over the past 20 years to create a business where I love to go to work. Smoking Meat Geeks is all about bringing people together that enjoy food as much as I do. We provide a place for everyone to share thoughts, ideas, and recipes; to be a go-to spot for cooking inspiration. Feel free to leave a comment, say hello, or provide any tips. There is no right or wrong input, as long as you’re engaging, you’re a Meat Geek!
The Ortech has two knobs. The large one, the "Cook Control" has settings for: Off, Smoke, 180, 225, 250, 275, 300, 325, 350, 375, and High. One smoker manufacturer says that the "Smoke" setting is about 160°F and "high" is about 525°F, but both can vary due to ambient temperature, humidity, fuel type and quality of the smoker. Another knob, a teensy weensy knob to the right of the LED screen looks more like a push button. Labeled "SMOKE" and called the "Smoke Control Knob", it is meant to turn, not push, and it controls the pellet feed rate with auger on/off sequences indicated by "P settings". The P settings range from P0 to P15.
When it comes to the material design of a pellet grill, the material is one of the most important aspects to consider for many reasons. First of all, the material has to be able to withstand extremely high temperatures and also be able to cook properly without the heat escaping the grill. With that said, the exterior or the grill has to be able to withstand high temperatures so the color does not peel, rust, or other defects. With that in mind, we discovered that all pellet grills have to be designed from some of the most important materials in the industry, so they can withstand the test of time. Alongside this, pellet grills are built to last so individuals can enjoy them for years to come. When it comes to the exterior craftsmanship of a pellet grill, the most common material is a powerful steel construction. Steel is also known as one of the most powerful and durable materials in the industry today. However, steel does rust if it is exposed to water. Therefore, many quality brands have powder coated the steel so it can be water resistant and does not rust easily.
From grilled beef, salmons to grilled turkeys I love them all. My passion for grilling delicacy gradually built during the time I was living with my parents. My family members especially my mother was a great fan of grilled dishes to and from the love of food. I started preparing smoked food with my mom. This bonding helped me to know more and more about to smoke, grill delicacies and also with smokers. So, in a word you can tell me a BBQ lover.
Does anyone know how to set up a pellet grill? Since pellet grills are a bit less common than a regular conventional gas grill, we had to conduct a bit of research and realized that pellet grills are as easy to set up, they just have more components. The components of the grill include a lid, which is designed to cover the contents of the grill as well as keep the heat in. Other than that, the ‘hopper’ is known as the area of the grill where an individual places the wood pellets and the grill drips the pellets onto the fire to keep the heat going.